Eichrom Technologies: Lessons learned from a successful high-tech startup
(Download printer-friendly, PDF version.)
ARGONNE, Ill. (July 6, 2007) — According to the U.S. Small Business
Administration, about 60 percent of new companies fail within six years. One
that has succeeded and grown is Eichrom
Technologies LLC, founded in 1990 to commercialize chemical separation
technology developed in the Chemistry
Division at Argonne National Laboratory. The story
of the company's founding and early travails provides insight into key issues
faced by high-tech start-ups and illustrates resources available through U.S.
Department of Energy (DOE) laboratories, such as Argonne, that can help smooth
some of the bumps.
Key to success is the need to solve customers' problems. Eichrom's initial
products grew out of a problem Argonne faced in the mid-1980s: The need to
find a faster way to perform urine and fecal analysis for employees who worked
with actinides, the heaviest metallic elements. A portion of Argonne's research,
then as now, deals with the nuclear fuel cycle and involves separating actinide
elements for recycling and to reduce the volume and toxicity of nuclear waste.
"At the time, bioassay results could take months to be completed due
to lengthy procedures and a large backlog of samples waiting to be analyzed," said
Phil Horwitz, whose research led directly to Eichrom's first products. Horwitz
worked for Argonne for decades. Retired from Argonne, he now works part time
for Eichrom.
Because of his nationally recognized experience in actinide chemistry, Horwitz
was named to a committee Argonne formed to investigate faster bioassay methods.
He and his team had recently developed a successful actinide separations process,
called TRUEX, to help remove the long-lived actinides from high-level wastes
at the U.S. Department of Energy's Hanford
Site.
"After some discussion," Horwitz said, "it became obvious that
the TRUEX process already contained all the necessary basic chemistry for rapid
bioassays. We just needed to modify it to use a chromatographic method."
Chromatography is a common method used in analytical labs around the world.
In a typical chromatographic analysis, a liquid containing a mix of chemicals
is poured into a glass or plastic column filled with resin beads. As the mixture
flows down the column, chemicals attached to the beads extract specific chemicals
from the mixture.
Horwitz hired a summer student — Mark Dietz, who today is a scientist in Argonne's Chemistry Division — to help develop the process. The result was TRU Resin. "TRU
Resin can determine all the actinides in a sample," Horwitz said. "It
proved so fast and effective that it saved Argonne millions of dollars in labor
costs."
In addition to TRU Resin, Horwitz's team also developed Sr Resin and UTEVA ® Resin.
These three resins offered significant breakthroughs in the analysis of actinides
and radioactive strontium. "Sr Resin was so effective and so superior
to other methods," Horwitz said, "that Argonne's analytical lab
wouldn't use any other method for strontium analysis."
Word of these resins spread quickly through the national laboratory system.
Soon other DOE laboratories began to request the materials, and Argonne began
to supply them. "But we weren't funded for manufacturing," Horwitz
said. "As demand grew from labs around the DOE system, we had to find
another way to produce them."
Aware of the resins and the growing demand, ARCH Development Corporation,
Argonne's technology transfer arm at that time, recognized that all the key
elements were in place to found a new company. The result was Eichrom Technologies.
"The company name," said Eichrom President Michael Fern, "is
an acronym that Phil Horwitz created: Extraction Ion exchange Chromatographic Materials."
Fern has been with Eichrom since its founding. He was named Eichrom president
in November 2006. He offers the following advice to entrepreneurs who plan
to build a business around new technology: “Raw inventions are usually not
ready for prime time. It's your job to get them ready. You have to develop
and test prototypes, round off the rough edges and make them user-friendly."
In radiochemical separations, he said, Argonne's inventions were a big breakthrough.
Eichrom's first customer was Argonne's bioassay laboratory, which had already
applied the resins to bioassay problems. Argonne knew how to use them, but
most potential customers didn't.
"We had useful products," Fern said, "and our potential customers
saw their value, but the customers had to figure out for themselves exactly
how to use them. Sales didn't really take off until we made the commitment
to develop and validate specific methods and procedures for customers to use
our products. We had to make the process turn-key for the customer."
To develop the necessary procedures, Eichrom formed a cooperative research
and development agreement (CRADAs) with Argonne. CRADAs are joint research
agreements in which participating organizations contribute resources – some
combination of funding, staff time, access to equipment or facilities, etc. – to
conduct research in which all parties have an interest.
The CRADA helped Eichrom develop a series of ready-to-use methods for the
separation and analysis of actinides, fission products and toxic metals. Eichrom
rented and equipped laboratory space on the Argonne campus, where Eichrom scientists
developed the protocols with Argonne's Dietz serving as consultant. The U.S.
Department of Energy (DOE) provided about $500,000 in support funding, and
the resulting procedures have since saved DOE laboratories many times that
amount in faster, more efficient and less costly analyses and bioassays.
"The analytical resin products," Fern said, "have been profitable
almost from the beginning. Sales in 1990, our first year, were about $26,000.
By 1995, sales were over $1 million. In 2006, revenues exceeded $6 million."
"The resins Phil and his team developed are still our flagship products," said
Fern. "We've also improved our quality and customer service quite a lot
over the years. Today we estimate that more than half a million analytical
procedures are carried out annually using at least one Eichrom product.”
Since then, Eichrom has established its own development and testing laboratory
and moved to the forefront of new product development and commercialization
in the areas of radiochemistry, geochemistry, hazardous metals analysis and
environmental screening for dioxins and related compounds. The company has
been 100 percent owned by investment company GCI since 1998.
Today, Eichrom's product and service offerings have grown well beyond the
original resins. The company has about 30 employees, split fairly evenly between
the United States and Europe, where the company sells radiochemistry products,
manufactured in Illinois, and operates a laboratory in France to analyze radioactivity
in drinking water. Eichrom is also introducing a new product for the rapid
analysis of dioxin in the environment and other samples.
"Eichrom continues to grow," Fern notes. "We have added significant
new products and services to our initial line of resins. But we know we wouldn't
be where we are today if Argonne and the Department of Energy hadn't been there
for us in the beginning."
Argonne National Laboratory brings
the world's brightest scientists and engineers together to find exciting and
creative new solutions to pressing national problems in science and technology.
The nation's first national laboratory, Argonne conducts leading-edge basic
and applied scientific research in virtually every scientific discipline. Argonne
researchers work closely with researchers from hundreds of companies, universities,
and federal, state and municipal agencies to help them solve their specific
problems, advance America 's scientific leadership and prepare the nation for
a better future. With employees from more than 60 nations, Argonne is managed
by UChicago
Argonne, LLC for
the U.S.
Department of Energy's Office
of Science.
— Dave Baurac
For more information, please
contact Steve McGregor (630/252-5580 or media@anl.gov)
at Argonne.
|