A Chinese International Economic and Technical Cooperation Co. would like to purchase the sued drilling pipes from U.S. with the specifications requested as follows:
Material:
J105 or S135
Technical Specifications:
- Diameter 88.9mm
- 88.9mmx9.35mm(thickness)x9.6m(length)
- Length of thread; at least more than 16 threads. The shoulder for the thread connecting box-up with 90 degrees angle plane and wearing and damage range: +5%
- Only one time used drilling pipes of right handed thread and rough thread
- Copper-plated thread. The length of subs connecting pin-down should be more than 200mm. The diameter of subs over 118mm
- Thread should be wide and smooth with damge of +5%
- Body of the pipes should be clean and smooth with erosion, blurs and freaks of 5%
- Body of the pipes should be straight without any warping and blocking in the drilling fluid holes
Packing:
the thread of the pipes should be greased and wrapped with plastic films
If there are any U.S. companies interested in this information, please contact Cindy-Ling Wangdirectly.