|
-
29
CFR 1910 Subpart I, Personal protective equipment. OSHA Standard.
-
1910.134,
Respiratory protection
-
Appendix A,
Fit testing procedures (Mandatory)
-
Appendix B-1,
User seal check procedures (Mandatory)
-
Appendix B-2,
Respirator cleaning procedures (Mandatory)
-
Appendix C,
OSHA respirator medical evaluation questionnaire (Mandatory)
-
Appendix D,
Information for employees using respirators when not required under the
standard (Mandatory)
- Questions and Answers on the Respiratory Protection Standard.
OSHA Memorandum, (1998, August 3), 237 KB PDF,
82 pages.
Provides questions and answers
relating to each paragraph of the Respiratory Protection Standard.
- Small
Entity Compliance Guide for the Revised Respiratory Protection Standard, (1998, September), 387 KB
PDF, 161
pages.
Helps small businesses comply with the new Respiratory Protection
Standard. A sample respiratory protection program is included as an appendix.
- Guide for Selection and Use of
Personal Protective Equipment & Special Clothing for
Foundry Operators. OSHA and American Foundry Society (AFS)
Safety and Health Committee (10Q), (2005), 914 KB PDF,
29 pages. This guide was developed by the American Foundry
Society’s (AFS) Safety and Health Committee (10Q) and is
a product of the OSHA and AFS Alliance. It describes
special considerations for the selection and use of
personal protective equipment and special clothing for
work situations in metal melting and pouring operations
that present a risk of exposure to foundry hazards.
-
NIOSH Guide to Industrial Respiratory Protection. US Department of
Health and Human Services (DHHS), National Institute for Occupational
Safety and Health (NIOSH) Publication No. 87-116, (1987, September).
Provides a table of contents with links to the
corresponding sections by title.
Accessibility Assistance: Contact the OSHA
Directorate of Science, Technology and Medicine at 202-693-2300 for
assistance accessing OSHA PDF materials.
|
Back to Top
www.osha.gov
