|
Home > Electronic Reading Room > Document Collections > NRC Regulations (10 CFR) > Part Index > § 71.123 Test control.
§ 71.123 Test control.
The licensee, certificate holder, and applicant for a CoC shall
establish a test program to assure that all testing required to
demonstrate that the packaging components will perform satisfactorily
in service is identified and performed in accordance with written test
procedures that incorporate the requirements of this part and the
requirements and acceptance limits contained in the package approval.
The test procedures must include provisions for assuring that all
prerequisites for the given test are met, that adequate test
instrumentation is available and used, and that the test is performed
under suitable environmental conditions. The licensee, certificate
holder, and applicant for a CoC shall document and evaluate the test
results to assure that test requirements have been satisfied.
|
