Table of Contents

• Disclaimer
• Agenda [PDF-103KB]
• Papers and Presentations
• Posters
• Audio/Video
• Final Participants [PDF-84KB]
• Peer review Rating Results Summary [PDF-218KB]

Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

Papers and Presentations

• Program Comments [PDF-196KB]
  Wayne A. Surdoval
  U.S. Department of Energy, National Energy Technology Laboratory
• An Overview of State Level Distributed Generation (/Fuel Cell) Program [PDF-865KB]
  Nag Patibandla
  New York State Energy R&D Authority
• Fuel Cell Product Development [PDF-1132KB]
  Richard Drake
  New York State Energy R&D Authority
• Lanthanum Ferrite Cathode Development at PNNL [PDF-846KB]
  Steve Simner
  Pacific Northwest National Laboratory
• Advanced Alloy Interconnect Development [PDF-1545KB]
  Gary Yang
  Pacific Northwest National Laboratory
• Development of Ceramic Composites as SOFC Anodes [PDF-481KB]
  Olga Marina
  Pacific Northwest National Laboratory
• Compressive Seal Development [PDF-1051KB]
  Y.S. Matt Chou
  Pacific Northwest National Laboratory
• SOFC Seals: SECA CTP Seal Meeting Overview [PDF-592KB]
  Prabhakar Singh
  Pacific Northwest National Laboratory
• Development of High Performance Seals for Solid Oxide Fuel Cells [PDF-659KB]
  Ronald Loehman
  Sandia National Laboratory
• Recent Development of Modeling Activities at PNNL [PDF-1676KB]
  Moe Khaleel
  Pacific Northwest National Laboratory
• Model Tool Development & Application at NETL [PDF-1269KB]
  Randall S. Gemmen
  U.S. Department of Energy, National Energy Technology Laboratory
• Durability & Reliability of SOFC Materials and Components [PDF-4303KB]
  Edgar Lara-Curzio
  Oak Ridge National Laboratory
• An Integrated Approach to Modeling and Mitigating SOFC Failure [PDF-6519KB]
  Jianmin Qu
  Georgia Institute of Technology
• Determination of Electrochemical Performance, and Thermo-Mechanical-Chemical Stability of SOFCS from Defect Modeling [PDF-1130KB]
  Eric Wachsman
  University of Florida
• Chromium Poisoning and Diesel Reforming [PDF-410KB]
  Michael Krumpelt
  Argonne National Laboratory
• Impact of Materials and Processing on Intermediate Temperature_SOFC Performance [PDF-1161KB]
  Steven J. Visco
  Lawrence Berkeley National Laboratory
• Advanced Measurement and Modeling Tools for Improved SOFC Cathodes [PDF-858KB]
  Stuart Adler
  University of Washington
• Functionally Graded Cathodes for SOFCs [PDF-7.6MB]
  Meilin Liu
  Georgia Institute of Technology
• Metal Interconnects for Solid Oxide Fuel Cell Power Systems [PDF-265KB]
  S. Elangovan
  Ceramatec, Inc.
• Fundamental Studies of the Durability of Materials for Interconnects in Solid Oxide Fuel Cells [PDF-701KB]
  Gerald H. Meier
  University of Pittsburgh
• Fuel Reforming Kinetics for Diesel-Based Fuel Cell Reformers [PDF-10.1MB]
  David A. Berry
  U.S. Department of Energy, National Energy Technology Laboratory
• Diesel Reforming for Fuel Cell Auxiliary Power Units [PDF-217KB]
  Rodney Borup
  Los Alamos National Laboratory
• Reduction of Carbon Formation from Nickel Catalysts Using Nickel-Gold Surface Alloys [PDF-337KB]
  David King
  Pacific Northwest National Laboratory
• A High-Efficiency Low-Cost DC-DC Converter for SOFC [PDF-1029KB]
  Jih-Sheng Lai
  Virginia Polytechnic Institute & State University
• Development of High Frequency Link Direct DC to AC Converters for Solid Oxide Fuel Cells (SOFC) [PDF-253KB]
  Prasad Enjeti
  Texas A&M University
• An Investigation to Resolve the Interactions among SOFC, Power-Conditioning Systems, and Application Loads [PDF-852KB]
  Sudip Mazumder
  University of Illinois
• Continuous Process for Low-Cost, High-Quality YSZ Powder [PDF-431KB]
  Scott Swartz
  NexTech Materials, Ltd.

Poster Presentations

• LSGM Based Composite Cathodes for Anode Supported, Intermediate Temperature (600-800°C) Solid Oxide Fuel Cells [PDF-109KB]
  Tad J. Armstrong, Materials and Systems, Research, Inc.
• A Metallic Interconnect for Intermediate Temperature Planar, Solid Oxide Fuel Cells (SOFC) [PDF-353KB]
  Tad J. Armstrong, Materials and Systems, Research, Inc.
• Advanced Thermal Spray Fabrication of Solid Oxide Fuel Cells
  Jeffrey Brogan and Sanjay Sampath, MesoScribe Technologies, Inc.
• Intermediate Temperature Operation SOFC Development [PDF-6628KB]
  S. Elangovan, Ceramatec, Inc.
• CERCANAM® Insulation for Solid Oxide Fuel Cells [PDF-452KB]
  Balakrishnan G. Nair, Ceramatec, Inc.
• Novel Materials for Obtaining Compliant, High-Temperature Seals for SOFCs [PDF-399KB] Charles Lewinsohn, Ceramatec, Inc.
• Cathode Polarization Studies for Intermediate Temperature Solid Oxide Fuel Cells Srikanth Gopalan, Boston University
• Development of Anode Materials with Unique Microstructures for Low-Temperature SOFCs [PDF-98KB]
  Meilin Liu, Georgia Institute of Technology
• Development of Sulfur Tolerant Materials for the Hydrogen Sulfide (H2S) Solid Oxide Fuel Cells [PDF-61KB]
  Meilin Liu, Georgia Institute of Technology
• SOFC Materials Development at NexTech Materials — Cathode Materials [PDF-396KB]
  Matthew M. Seabaugh, NexTech Materials
• SOFC Materials Development at NexTech Materials — Seals and Electrolyte Materials [PDF-1597KB]
  Matthew M. Seabaugh, NexTech Materials
• Dimensional Change In Situ for SOFC Stack Manufacturing [PDF-73KB]
  John Lannutti, The Ohio State University

Audio/Video

The audio/video streams below were created using WebEx.  Please install one of these free players before opening the files.  PC Player, MAC OS9, MAC OSX

Day 1
Part 1
Part 2
Part 3
Part 4

Day 2
Part 5
Part 6
Part 7
Part 8   

NETL Conference Services Information