|
|
|
|
|
|
|
From Rockets
to Racecars
Transportation
Originating Technology/ NASA Contribution
NASA’s Langley Research Center scientists developed
a family of catalysts for low-
temperature oxidation of carbon monoxide and other
gases. The catalysts provide oxidation of both carbon
monoxide and formaldehyde at room temperature without
requiring any energy input, just a suitable flow of
gas through them.
Originally designed as part of an atmospheric satellite
project, where the catalysts were intended to recycle
and recapture carbon dioxide to enhance the operational
life of carbon dioxide lasers, the entire system was
made to be rugged, long-lived, and fail-safe.
The low-temperature oxidation catalysts can be
produced and coated onto various catalyst supports,
including porous ceramic monoliths and beads, which
means that they can be integrated into existing designs,
made to fit in limited space, and fashioned into a
variety of geometrically different products.
Although the satellite project was never launched, the resulting catalysts are
doing great things here on Earth, with current applications in the high-speed
motor sports arena as air purifiers, so professional racecar drivers do not get
carbon monoxide poisoning. Future benefits may extend even further.
Partnership
The aerospace industry has always had a direct link to the automotive industry,
and NASA has, over the years, provided a great deal of its technology to its
ground-based cousin, whether it was in the form of grooved pavement to reduce
the risk of hydroplaning vehicles, or helping to design crash test dummies with
embedded sensors. NASA has also contributed to automobile industry technological
advances such as a software program that measures tire safety and fuel cell research
that is revolutionizing the next generation of hybrid vehicles.
NASA’s operations also have something in common with the rigors of high-performance
competitive driving. Both require reliability under extreme conditions with little
or no maintenance. Add to that the fact that NASA currently holds several Guinness
Book of World Records records for speed, and the connection becomes even clearer.
The high-speed motor sports industry has benefited from NASA in several ways.
Under a Space Act Agreement between Boeing North America, Penske Racing, and
BSR Products, Space Shuttle Thermal Protection System materials are now used
to insulate racecars. In the early days of the Space Shuttle Program, NASA scientists
and the 3M company worked to improve high-temperature tiles and textiles to withstand
the intense heat and pressures of reentry. These tiles, now manufactured by the
3M Company, are used on the floorboards of National Association for Stock Car
Auto Racing (NASCAR) vehicles to block engine heat. These two innovations keep
drivers safe when they are zooming by at speeds in excess of 200 miles per hour.
Additionally, the large 30- by 60-foot wind tunnel at Langley, currently leased
to Old Dominion University, is being used to test airflow over racecars. Future
plans are in the works to perform even more racecar testing
at Langley.
The newest addition to NASA’s contributions to high-speed motor sports is the
new family of air catalysts. Penske Racing, of Mooresville, North Carolina, has
designed an air filter using the NASA catalysts for drivers on the high-speed
racing scene. STC Catalysts, Inc. (SCi), a subsidiary of Science and Technology
Corporation, in Hampton, Virginia, manufactures the catalysts and has been supplying
them to Kustom Komponents, of Temple, Pennsylvania, for use in these filters.
Product Outcome
|
NASA
has close ties with the high-performance competitive driving circuit.
The Agency’s latest contribution to the sport comes in the form of an
air catalyst—part of a filter to keep drivers safe from the carbon monoxide
lingering over the track. |
The filtration unit being sold to racecar drivers is about the size and shape
of a Thermos bottle. It is part of a compound filter system containing absorbents
and other materials to effectively remove noxious gasses from the driver’s air
stream. In order to be implemented into the design of the high-performance cars,
it has to be small and compact so as not to add unwanted weight. Its capabilities
derive from a unique surface chemistry and airflow over and through a formulation
of platinum and tin oxide incorporated within a honeycombed form. As fumes enter
the passenger-side air duct, they flow through an activated carbon filter, the
carbon monoxide scrubbing catalyst, and finally through a 99.997-percent high
efficiency particulate air (HEPA) filter. This unit filters out harmful gases
before they affect the driver’s health. The air is then cooled before being delivered
directly to a port in the driver’s helmet.
Cleaner air virtually eliminates carbon monoxide poisoning and the resulting
flu-like symptoms, like headaches, fatigue, and dizziness that have traditionally
lingered for days after races. The symptoms, compared by drivers to the worst
hangover in the world, come from prolonged exposure to carbon monoxide as the
drivers circle the track in a pack. Carbon monoxide poisoning occurs when so
much of it is inhaled that it starts to replace the oxygen that is carried in
the blood. Carbon monoxide binds to red blood cells about 250 times more strongly
than oxygen. As the oxygen is replaced by the carbon monoxide, the body’s organs
and tissues cannot work properly.
The racecars are so close to each other and run so many laps, that the drivers
literally never have a break from the carbon monoxide. Additionally, racecars
do not have catalytic converters to reduce carbon monoxide emissions like commuter
cars do, and they produce more emissions per hour due to the high speeds they
travel. Exposure to the elevated level of fumes causes drivers to feel woozy,
nauseous, and fatigued. It has even led to early retirement for some.
Rick Mast, a veteran racecar driver who boasted 364 starts over the course of
his 15-year career, retired in 2003, citing chronic carbon monoxide poisoning
as the cause. He complained of dizziness, headaches, and nausea that eventually
ended his career. Other drivers spoke out about health problems resulting from
carbon monoxide inhalation, and NASCAR responded by initiating a series of tests
and looking for a filtration system that would keep drivers safe, something it
called its “fresh air” study.
|
The
clean air pumped through this filter virtually eliminates carbon monoxide
poisoning and the resulting flu-like symptoms, like headaches, fatigue,
and dizziness that have traditionally lingered for days after races. |
Penske Engineering, under the direction of its president, Don Miller, drove the
effort to design, develop, and demonstrate the filter. Penske worked with researchers
at one of Langley’s wind tunnels to control and isolate cooled air for filtration.
Traditional racecars filter air before it is cooled, and then use most of the
cooled air for heat rejection. Penske, however, through its work at the wind
tunnel, managed to isolate an air stream, cool it, and then, using the precision
air flow, design the filter.
Dubbed the “INCAR System” and manufactured and marketed by Kustom Komponents,
approximately 190 kits have been produced and are in use by major racing teams,
including Penske Racing, Roush Racing, Hendrix Motorsports, and Robert Yates
Racing, among others. Estimates show that the reduction in harmful gasses is
as much as 70 percent, or more, depending upon track and humidity conditions.
This virtually eliminates the sickness drivers often refer to as getting “gassed.”
It is now common for drivers in high-speed motor sports to have the Penske filtration
system installed in their cars.
Since the debut of its partnership with the racing industry, SCi’s business has
boomed. In fact, its needs have outgrown its building size. A move to more spacious
quarters will be completed by 2006, and the company intends to upgrade its laboratory,
add staff, and triple its catalyst production capacity.
Penske, on the other hand, is not profiting much from this venture economically;
but rather, it invested the research and capital to protect drivers from carbon
monoxide poisoning, and that, so far, has been a very
satisfactory result.
3M™ is a trademark of 3M Company.
Thermos® is a registered trademark of Thermos L.L.C.
|
|
|
|