TROPICAL ATMOSPHERE-OCEAN (TAO) PROGRAM
DRAFT
CRUISE INSTRUCTIONS
FOR
KA-05-04
GP4-05-KA
July 15 – August 12, 2005
TAO Program Director
Dr. Michael J. McPhaden
PMEL, TAO Project Office
7600 Sand Point Way NE
Seattle, WA 98115
Area: Equatorial Pacific
Itinerary:
KA-05-04 Kwajalein, RMI DEP - July 15. 2005
Honolulu, HI ARR – August 12, 2005 (Kwajalein date)
CRUISE DESCRIPTION
General guidelines are contained in the TAO Program Standard Operating Instructions for NOAA Ship KA’IMIMOANA dated December 8, 2004.
Cruise Objective and Plan:
The objective of this cruise is the maintenance of the TAO Array along the 165°E and 180° meridians. The ship will depart on July 15, 2005 to commence operations as listed in Appendix A. After completion of operations, KA’IMIMOANA will proceed to Honolulu, HI arriving on or about August 12, 2005. All dates and times referred to in these cruise instructions are in Pacific Standard Time (PST).
PMC Operations: TAO Operations Manager:
Larry Mordock LCDR Brian Lake, NOAA
NOAA/MOC-Pacific (MOC-P1x3) PMEL, TAO, R/PMEL
1801 Fairview Ave. East 7600 Sand Point Way NE
Seattle, WA 98102-3767 Seattle, WA 98115-0070
(206) 553-4764 (206) 526-6403
Larry.Mordock@noaa.gov Brian.Lake@noaa.gov
1.0 PERSONNEL
1.1 CHIEF SCIENTIST AND PARTICIPATING SCIENTISTS:
Chief Scientist: Ben Moore
The Chief Scientist is authorized to revise or alter the scientific portion of the cruise plan as work progresses provided that, after consultation with the Commanding Officer, it is ascertained that the proposed changes will not: (1) jeopardize the safety of personnel or the ship; (2) exceed the overall time allotted for the cruise; (3) result in undue additional expenses; (4) alter the general intent of these instructions. A list of participating scientists follows. All participating scientists will submit a medical history form and be medically approved before embarking.
Participating Scientists
Name |
Gender |
Nationality |
Affiliation |
Ben Moore |
M |
US |
NOAA/PMEL |
Dai McClurg |
M |
US |
NOAA/PMEL |
Brian Powers |
M |
US |
NOAA/PMEL |
TBA |
M |
US |
MBARI |
TBA |
M |
US |
NDBC |
TBA |
M |
US |
NDBC |
2.0 OPERATIONS
Mooring Operations are scheduled to be conducted as shown in Appendix A. Operations will be conducted from 8°N - 165°E to 8°S - 165°E and 8°S - 180° to 8°N 180° and via 8°N 180°. The following mooring operations are anticipated, though the work may be changed by direction of the Chief Scientist, in consultation with the Commanding Officer.
Location |
Mooring Type |
Operation |
Status |
8°N 165°E |
ATLAS |
Recover/Deploy |
|
5°N165°E |
ATLAS |
Repair |
Swap SWR, Rain (TRMM) |
2°N165°E |
ATLAS |
Recover/Deploy |
|
0°165°E |
ATLAS |
Recover/Deploy |
RH questionable, Compare with ship prior to recovery |
2°S165°E |
ATLAS |
Repair |
Swap SWR (TRMM), install new SSC (picklefork) |
5°S165°E |
ATLAS |
Recover/Deploy |
|
8°S165°E |
ATLAS |
Recover/Deploy |
|
8°S180° |
ATLAS |
Recover/Deploy |
|
5°S180° |
ATLAS |
Recover/Deploy |
|
2°S180° |
ATLAS |
Visit |
|
0°180° |
ATLAS |
Recover/Deploy |
|
2°N180° |
ATLAS |
Recover/Deploy |
|
5°N180° |
ATLAS |
Visit |
|
8°N180° |
ATLAS |
Recover/Deploy |
|
2.01 CTD
At a minimum, 1000 meter CTD casts shall be conducted at each mooring site between 8° N and 8° S for sensor inter‑comparison purposes. As time permits, additional or deeper CTD’s should be conducted whenever addition of the CTD’s will not impact scheduled mooring work. For example, if the ship would arrive at the next mooring site in the middle of the night, it is preferable to do CTD’s on the way, rather than remain hove to waiting for daylight. Another example would be when mooring operations are significantly ahead of schedule. Beyond those at mooring sites, CTD’s should be conducted in the following order of priority:
- 1000m CTD’s at one degree latitude intervals between 12° N and 8° S, along the ship’s trackline.
- Extend 1000m CTD’s at mooring sites to a minimum of 3000m or a maximum depth of 200m from bottom. 4 to 6 deep casts are optimal, occurring at the beginning and end of the cruise as well as at both equatorial sites.
- 1000m CTD’s every one‑half degree of latitude between 3°N and 3°S
- Additional calibration CTD’s to be determined by Chief Scientist.
2.02 Monterey Bay Aquarium Research Institute (MBARI) Chlorophyll and Nutrients
Phytoplankton
biomass work consisting of chlorophyll extractions and nutrients samples will
be collected from CTD rosette at 0, 10, 25, 40, 60, 100, 150 and 200m. The
total volume used from each bottle, including rinses is approximately two
liters; except for the surface bottle, which will require approximately four
liters. This requires use of the sink/bench area of the wet lab for filtration
purposes. Chlorophyll samples will be measured on-board using a bench-top
fluorometer. Nutrient samples (sea water) will be
stored in the science hold and off-loaded upon return.
2.03 Atlantic Oceanographic and Meteorological Laboratory (AOML) Surface Drifters
The Global Drifter Center at NOAA/AOML requests drifter deployments on an ancillary basis. The drifters are small, easily deployed devices which are tracked by Argos and provide Sea Surface Temperature (SST) and mixed layer currents. The global array of drifters provides SST ground truth for NOAA’s polar orbiting satellite AVHRR SST maps. They also provide data to operational meteorological and ocean models, and research ocean current data sets. Ten AOML drifters are scheduled at the following positions:
TBD
Craig Engler, Global Drifter Center, NOAA/AOML
305‑361‑4439 (office) or 305‑361‑4392 (fax)
Craig.Engler@noaa.gov or http://www.aoml.noaa.gov/
2.04 Pacific Marine Environmetal Lab (PMEL) Argo profiling CTD floats
??? Argo floats are scheduled for deployment on this cruise. Individual deployment positions can be shifted by a degree or so along the ship track if more convenient. Each float weighs about 56 lbs. Boxes are numbered sequentially in order of deployment. The boxes weigh about 200 lbs. full and are 82” long x 17” high x 23” long. Boxes cannot be stored or transported on their small ends. The floats are ensitive to high temperatures, so as space for a pair of floats becomes available on the computer lab rack, it will be desirable to move floats from the next box to the rack at the earliest convenient time. A manual for
float-testing and deployment has been sent to the ship. Float deployment locations are as follows:
TBD
Argo float questions should be directed to:
Gregory Johnson or Elizabeth Steffen
NOAA/PMEL NOAA/PMEL
(206) 526-6806 (206) 526-6747
Gregory.C.Johnson@noaa.gov Elizabeth.Steffen@noaa.gov
2.05 Discrete gas sampler
Whole air samples are cryogenically dried and pumped into glass flasks by an automated system in the computer lab. Following the cruise, the flasks are returned to Princeton University for analysis by prepaid FEDEX. Pairs of flasks are collected while the ship is underway at 8N, 4N, 0, 4S and 8S along the 165ºE and 180ºW lines. Automated sampling cycle is approximately 5 hours. It is anticipated that the Survey Technician will perform the maintenance tasks. The contact for this project is:
Michael Bender, Princeton University
(609) 258-2936 bender@geo.princeton.edu
2.06 Dissolved inorganic carbon analysis (DIC)
A 0.5-liter seawater sample from surface CTD casts will be taken and stored for later dissolved inorganic carbon analysis. Sample jars and mercury chloride solution will be provided by Scripps institute of Oceanography. It is anticipated that the survey technician, together with MBARI personnel will take the samples. A small bench-top drill press is installed on the ship to assist with the bottle capping process. Samples will be shipped to Scripps at the conclusion of GP4 in Honolulu. The contacts for this project are:
Dr. Andrew Dickson Dr. Richard Feely
Scripps Institution of Oceanography NOAA/PMEL
University of California, San Diego 7600 Sand Point Way NE
Room 203 -- Vaughan Hall Seattle, Washington 98115
8675 Discovery Way
La Jolla, CA 92037 Tel (206) 526-6214
Tel: (858) 534-2582
Email: adickson@ucsd.edu Richard.A.Feely@noaa.gov
2.09 Nitrate N and Oxygen isotope analysis
At 0165E and 0180W, a 50 ml seawater sample from surface CTD casts will be taken and stored for later Nitrate N and Oxygen isotope analysis. Sample jars will be provided by Scripps Institute of Oceanography. It is anticipated that the survey technician, together with MBARI personnel will take the samples. Samples will be frozen in the MBARI freezer and will be shipped to Scripps at the conclusion of this cruise. The contact for this project is:
Patrick Rafter
SIO - UCSD
9500 Gilman Dr. Dept 0208
La Jolla, CA 92093
3.0 Hazardous Materials
NOAA Ship KA’IMIMOANA will operate in full compliance with all environmental compliance requirements imposed by NOAA. The Chief Scientist shall be responsible for complying with MOCDOC 15, Fleet Environmental Compliance #07, Hazardous Material and Hazardous Waste Management Requirements for Visiting Scientists, released July 2002. The MOCDOC web site address is:
By Federal regulations and NOAA Marine and Aviation Operations policy, the ship may not sail without a complete inventory of all hazardous materials by name and the anticipated quantity brought aboard, MSDS and appropriate neutralizing agents, buffers, and/or absorbents in amounts adequate to address spills of a size equal to the amount of chemicals brought aboard and a chemical hygiene plan. The amount of hazardous material arriving and leaving the vessel shall be accounted for by the Chief Scientist. NOAA Ship KA’IMIMOANA Environmental Compliance Officer will work with the Chief Scientist to ensure that this management policy is properly executed, and that any problems are brought promptly to the attention of the Commanding Officer.
3.1 Material Safety Data Sheet (MSDS)
All hazardous materials require a Material Safety Data Sheet (MSDS). Copies of all MSDS’s shall be forwarded to the ship at least two weeks prior to sailing. The Chief Scientist shall have copies of each MSDS available when the hazardous materials are loaded aboard. Hazardous material for which the MSDS is not provided will not be loaded aboard.
3.2 HAZMAT Inventory
The Chief Scientist will complete a local inventory form, provided by the Commanding Officer, indicating the amount of each material brought onboard, and for which the Chief Scientist is responsible. This inventory shall be updated at departure, accounting for the amount of material being removed, as well as the amount consumed in science operations and the amount being removed in the form of waste.
3.3 HAZMAT Locker
The ship’s dedicated HAZMAT Locker contains two 45-gallon capacity flammable cabinets and one 22-gallon capacity flammable cabinet, plus some available storage on the deck. Unless there are dedicated storage lockers (meeting OSHA/NFPA standards) in each van, all HAZMAT, except small amounts for ready use, must be stored in the HAZMAT Locker.
3.4 HAZMAT Spill Response
The scientific party, under the supervision of the Chief Scientist, shall be prepared to respond fully to emergencies involving spills of any mission HAZMAT. This includes providing properly-trained personnel for response, as well as the necessary neutralizing chemicals and clean-up materials. Ship’s personnel are not first responders and will act in a support role only, in the event of a spill.
3.5 Responsibilities
The Chief Scientist is directly responsible for the proper handling, both administrative and physical, of all scientific party hazardous wastes. No liquid wastes shall be introduced into the ship’s drainage system. No solid waste material shall be placed in the ship’s garbage. Ancillary Projects shall properly train their personnel in hazardous material handling and disposal.
3.6 Ancillary Projects Hazardous Materials
1. Acetone 12 Liters MBARI
2. Hydrochloric Acid (HCL) 6 Liters MBARI
3. Mercuric Chloride solution (saturated with 30 grams) 400 ML Scripps/PMEL
4. Mercuric Chloride powder 30 g Scripps/PMEL
Appendices:
A. Operations Spreadsheet
B. Trackline
C. Mooring Equipment Weight List