Circuit
User Supplied

Modem
User Supplied

Communications
The NWSTG will provide a router port for a serial interface at speeds up to T1.

The customer has responsibility to provide the circuit and CSU/DSU or any other circuit terminating equipment that will reside at the NWSTG. While it is not required, it is recommended that the customer order the CSU/DSU from the carrier rather than purchasing one for the installation. In this way, the end to end responsibility for the Service will be upon the carrier.
If there are any special adapter cables, they should also be provided by the customer. Installation should also be provided by the customer and should include any configuration that is specific to the equipment provided. If there are any special adapter cables, they should also be provided by the customer. Installation should also be provided by the customer and should include any configuration that is specific to the equipment provided.

The Server Access Service (SAS) provides access to the NWSTG networks and resources that reside there, in particular the File Server. Since no other routing is necessary, we will not automatically provide routing information and will not accept routing information on these lines. All routing should be performed by means of Static Routes.

Any points not covered will be worked out between the NWSTG and the customer.

Equipment Contact
Stan Smith - (301) 713-0902 (1st) (301) 713-0870 ext. 151 (2nd)
Joe Edgett - (301) 713-0902 (1st) (301) 713-0870 ext. 146 (2nd)
Russ Wanek - (301) 713-0902 (1st) (301) 713-0870 ext. 155 (2nd)

Communications Contact
Jackie Lord - (301) 713-0877 x 126

 

Radar Products Service (RPS)