| Activity Nr |
Provides a unique identifier for the inspection. |
| Report ID |
Identifies the OSHA office or organizational unit responsible for the inspection. |
| Open Date |
Indicates when the inspection was started. |
| CSHO/Job Title |
Identifies the individual responsible for conducting the inspection. |
| Site Address |
Identifies the site location where the inspection was performed. |
| Mailing Address |
Identifies the mailing address for the organization being inspected when differing from site address. |
| SIC |
Indicates the 4-digit Standard Industrial Classification Code from the 1987 version SIC manual which most closely applies. |
| Nr Employees |
Indicates number employed at worksite inspected. |
| Nr Controlled |
Indicates number of employees, nationwide, controlled by employer inspected. |
| Union Status |
Indicates whether employees covered by inspection were affiliated with a union. |
| LWDI Rate |
Indicates the lost workday injury rate posted at time of inspection. |
| Inspection Type |
Indicates the impetus for actually performing the inspection; e.g., may be part of a planned schedule, accident, complaint, etc. |
| Scope |
Indicates whether a complete, partial or records only inspection was performed; may also indicate no inspection if for some reason the inspection could not take place. |
| Ownership |
Indicates whether inspection was in private or public sector. |
| Safety/Health |
Indicates whether safety or health issues were the focus of the inspection. |
| Local Emphasis |
Indicates whether specific office dependent initiatives were present when performing the inspection. |
| National Emphasis |
Indicates whether special OSHA wide initiatives were present when performing the inspection. |
| Planning Guide |
Indicates that this inspection was planned from information contained in a planning guide; the guide is associated with high hazard industry groups. |
| Nr Covered |
Indicates number of employees covered by the inspection. |
| Advance Notice |
Indicates whether advance notice was given of the pending inspection. |
| Hours Spent |
Indicates number of manhours associated with the inspection. |
| Close Conference |
Indicates the ending date of the onsite portion of the inspection. |
| Close Case |
Indicates the date on which all activity associated with the inspection ceased. |
| Optional Information |
Indicates additional information recorded for the inspection. |
| Related Activity |
Indicates a related complaint, accident, referral or another inspection. |
| Nr Violations |
Total does not include violations which were deleted due to a settlement or judicial action. Violations which are grouped (see below) are only counted once as a group rather that individually for each standard cited.
|
| Penalty Amount |
Total represents the amount currently assessed for the inspection. This may differ from the Initial Penalty if settlement or judicial actions resulted in reductions. |
| FTA Amount |
Total represents Failure To Abate assessment resulting when the violations were not abated during the abatement period specified on the citation. |
| Delete Flag |
The letter "D" will be displayed at the beginning of each detail line if the violation item was deleted as the result of settlement or judicial action. |
| Citation ID |
Provides a unique identifier for the violation. Consists of a 2-digit Citation Nr, followed by a 3-digit Item Nr, followed optionally by a 1 or 2 letter indicator if the violation item is part of a group. Violations
may be grouped when 2 or more violations together form a more serious hazard than either one individually. |
| Violation Type |
Indicates Willful, Repeat, Serious, Other, or Unclassified. Provides an indication of the degree of severity of the hazard found. |
| Standard |
Indicates the OSHA standard being cited. The standard may be either Federal or State in the case of states which run their own OSHA. |
| Issuance Date |
Represents the date the citation was issued to the employer. |
| Abatement Date |
Represents the date by which the violation must be corrected. |
| Current Penalty |
Represents the amount currently assessed for the violation. This may differ from the Initial Penalty if settlement or judicial actions resulted in reductions. |
| Initial Penalty |
Represents the amount initially assessed when the citation was first issued to the employer. |
| Failure to Abate Penalty |
Represents Failure To Abate assessment resulting when the violation was not abated during the abatement period specified on the citation. |
| Contest Date |
Represents the date the violation was contested by the employer. |
| Event Code |
Represents a settlement or judicial action which occured. |
| Summary Nr |
Provides an unique identifier for the accident investigation. This investigation may be linked to several inspections, e.g., if there were multiple contractors at a construction site. |
| Event Date |
Indicates the date on which the accident occured. |
| Event Description |
Provides a short one line description of the accident. |
| Event Abstract |
Provides a summary of the accident. |
| Inspection Nr |
Provides for each injury a link to the corresponding inspection. |
| Age |
Indicates the age of the injured person. |
| Sex |
Indicates the sex of the injured person. |
| Degree of Injury |
Indicates whether the injured person was killed, hospitalized, or non-hospitalized injury. |
| Nature of Injury |
Indicates the nature of the injury. |
| Occupation |
Indicates the occupation of the injured person. |
Back to Top 
www.osha.gov
