Debra Willard
Kotra, R. K.; Holmes, C. W.; Orem, W. H.; Hageman, P. L.; Briggs, P. H.; Meier, A. L.; Brown, Z. A.
Robbins, John, Halley, Robert, Bothner, Michael, ten Brink, Marilyn, Marot, Marci
Bruce Wardlaw, editor
The cores were selected for analysis based on the x-rays. Those cores selected for further analysis were selected on the basis of laminations or other features which indicated the lack of disturbance. The core was placed in an extruding device vertically. The core was then extruded up into a template and sliced. This slice (hockey puck) was place on a preweighed titanium plate and the wet weight determined. The ring was then removed and the slice was trimmed to remove the outer portion of the core. This was done to prevent any contamination that may have occurred at the side of the core barrel during the coring operation. This sample was then bagged and weighed. This weight was found to be important in the determination of water content and thus the dry weight as water was lost during the period of initial sampling and the laboratory analysis. These sample were then stored in a refrigerator and then transhipped to the home based laboratory. For those core selected for trace metal analysis, the slices were sampled from the center of the "hockey puck" with titanium tools and place in an acid washed plastic bottle and frozen.
U.S. Department of the Interior, U.S. Geological Survey
Comments and suggestions? Contact: Heather
Henkel - Webmaster
Generated by mp version 2.8.18 on Wed Oct 31 16:35:33 2007