| Patents > Search Colections > MPEP > 707.05(e) Data Used in Citing References [R-2] - 700 Examination of Applications |
|
|
|
Go to MPEP - Table of Contents
707.05(e) Data Used in Citing References [R-2] - 700 Examination of Applications
707.05(e) Data Used in Citing References [R-2]
37 CFR 1.104(d) (see also MPEP § 707.05 and § 901.05(a)) requires the examiner to provide certain data when citing references. The examiner should provide the citations on the "Notice of References Cited" form PTO-892 (copy at MPEP § 707.05).
>I. < U.S. PATENT DOCUMENTS
If a U.S. patent application publication is cited by the examiner, the publication number, publication date, name of the applicant, class, and subclass should be cited under the section "U.S. Patent Documents" on the form PTO-892. For U.S. patents, the patent number, patent date, name of the patentee, class and subclass should also be cited under the same section. In addition, examiners are encouraged to cite the kind codes printed on U.S. patent application publications and patents. See MPEP § 901.04(a) for an explanation of the kind codes. See MPEP § 901.04 for details concerning the various series of U.S. patents and how to cite them. Note that patents of the X-Series (dated prior to July 4, 1836) are not to be cited by number. Some U.S. patents issued in 1861 have two numbers thereon. The larger number should be cited.
Defensive Publications and Statutory Invention Registrations (SIRs) should be cited under the section "U.S. Patent Documents" on the form PTO-892 (see MPEP § 711.06(a) and § 901.06(a)).
>II. < FOREIGN PATENTS AND FOREIGN PUBLISHED APPLICATIONS
In citing foreign patents, the patent number, kind code, citation date, name of the country, name of the patentee, and U.S. class and subclass, if appropriate, must be given. Foreign patents searched in those Technology Centers (TCs) filing by International Patent Classification (IPC) will be cited using the appropriate IPC subclass/group/subgroup. On the file wrapper "Searched" box and PTO-892, the IPC subclass/group/subgroup shall be cited in the spaces provided for "Classification." >For Image File Wrapper (IFW) processing, see IFW Manual section 3.7.<
Where less than the entire disclosure of the reference is relied upon, the sheet and page numbers specifically relied upon and the total number of sheets of drawing and pages of specification must be included (except applicant submitted citations). If the entire disclosure is relied on, the total number of sheets and pages are not required to be included on the PTO-892.
Publications such as German allowed applications and Belgian and Netherlands printed specifications should be similarly handled.
See MPEP § 901.05(a) for a chart in which foreign language terms indicative of foreign patent and publication dates to be cited are listed.
>III. < PUBLICATIONS
Abstracts, abbreviatures, Alien Property Custodian publications, withdrawn U.S. patents, withdrawn U.S. patent application publications, and other non-patent documents should be cited under the section "Non-Patent Documents" on the form PTO-892). See MPEP § 711.06(a) for citation of abstracts, and abbreviatures. See MPEP § 901.06(c) for citation of Alien Property Custodian publications. In citing a publication, sufficient information should be given to determine the identity and facilitate the location of the publication. For books, the data required by 37 CFR 1.104(d) ( MPEP § 707.05) with the specific pages relied on identified together with the Scientific and Technical Information Center (STIC) call number will suffice. The call number appears on the "spine" of the book if the book is thick enough and, in any event, on the back of the title page. Books on interlibrary loan will be marked with the call numbers of the other library, of course. THIS NUMBER SHOULD NOT BE CITED. The same convention should be followed in citing articles from periodicals. The call number should be cited for periodicals owned by the STIC, but not for periodicals borrowed from other libraries. In citing periodicals, information sufficient to identify the article includes the author(s) and title of the article and the title, volume number issue number, date, and pages of the periodical. If the copy relied on is located only in the Technology Center making the action (there may be no call number), the additional information, "Copy in Technology Center - -" should be given.
The following are examples of nonpatent bibliographical citations:
(A) For books:
Winslow. C. E. A. Fresh Air and Ventilation. N.Y., E. P. Dutton, 1926. p. 97-112. TI17653.W5.
(B) For parts of books:
Smith, J. F. "Patent Searching." in: Singer, T.E.R., Information and Communication Practice in Industry (New York, Reinhold, 1958), pp. 157-165. T 175.S5.
(C) For encyclopedia articles:
Calvert, R. "Patents (Patent Law)." in: Encyclopedia of Chemical Technology (1952 ed.), vol. 9, pp. 868-890. Ref. TP9.E68.
(D) For sections of handbooks:
Machinery's Handbook, 16th ed. New York, International Press, 1959. pp. 1526-1527. TJ151.M3 1959.
(E) For periodical articles:
Noyes, W. A. A Climate for Basic Chemical Research
Chemical & Engineering News, Vol. 38, no. 42 (Oct. 17, 1960), pp. 91-95. TP1.I418.
The following are examples of how withdrawn U.S. patents and withdrawn U.S. patent application publications should be cited:
(A) Withdrawn U.S. patents:
US 6,999,999, 10/2002, Brown et al., 403/155 (withdrawn).
(B) Withdrawn U.S. patents application publications:
US 2002/0009999 A1, 7/2002, Jones et al., 403/155 (withdrawn).
Titles of books and periodicals SHOULD NOT be abbreviated because an abbreviation such as P.S.E.B.M. will not be sufficient to identify the publication. References are to be cited so that anyone reading a patent may identify and retrieve the publications cited. Bibliographic information provided must be at least enough to identify the publication. author, title and date. For books, minimal information includes the author, title, and date. For periodicals, at least the title of the periodical, the volume number, date, and pages should be given. These minimal citations may be made ONLY IF the complete bibliographic details are unknown or unavailable.
Where a nonpatent literature reference with a document identification number is cited, the identification number and the class and subclass should be included on form PTO-892. For example, the citation should be as follows: (S00840001) Winslow, C.E.A. Fresh Air and Ventilation N.Y., E.P. Dutton, 1926, p. 97-112, TH 7653, W5, 315/22.
If the original publication is located outside the Office, the examiner should immediately make or order a photocopy of at least the portion relied upon and indicate the class and subclass in which it will be filed, if any.
>IV. < ELECTRONIC DOCUMENTS
An electronic document is one that can be retrieved from an online source (e.g., the Internet, online database, etc.) or sources found on electronic storage media (e.g., CD-ROM, magnetic disk or tape, etc.). Many references in paper format may also be retrieved as electronic documents. Other references are retrievable only from electronic sources.
The U.S. Patent and Trademark Office follows the format recommended by World Intellectual Property Organization (WIPO) Standard ST.14, "Recommendation for the Inclusion of References Cited in Patent Documents." The format for the citation of an electronic document is as similar as possible to the format used for paper documents of the same type, but with the addition of the following information in the locations indicated, where appropriate:
(A) the type of electronic medium provided in square brackets [ ] after the title of the publication or the designation of the host document, e.g., [online], [CD-ROM], [disk], [magnetic tape];
(B) the date when the document was retrieved from the electronic media in square brackets following after the date of publication, e.g., [retrieved on March 4, 1998], [retrieved on 1998-03-04]. The four-digit year must always be given.
(C) identification of the source of the document using the words "Retrieved from" and its address where applicable. This item will precede the citation of the relevant passages.
(D) specific passages of the text could be indicated if the format of the document includes pagination or an equivalent internal referencing system, or by the first and last words of the passage cited.
Office copies of an electronic document must be retained if the same document may not be available for retrieval in the future. This is especially important for sources such as the Internet and online databases.
If an electronic document is also available in paper form it does not need to be identified as an electronic document, unless it is considered desirable or useful to do so.
Examples 1-4: Documents retrieved from online databases outside the Internet
Example 1:
SU 1511467 A (BRYAN MECH) 1989-09-30 (abstract) World Patents Index [online]. London, U.K.: Derwent Publications, Ltd. [retrieved on 1998-02-24]. Retrieved from: Questel/Orbit, Paris, France. DW9016, Accession No. 90-121923.
Example 2:
DONG, X. R. 'Analysis of patients of multiple injuries with AIS-ISS and its clinical significance in the evaluation of the emergency managements', Chung Hua Wai Ko Tsa Chih, May 1993, Vol. 31, No. 5, pages 301-302. (abstract) Medline [online]. Bethesda, MD, USA: United States National Library of Medicine [retrieved on 24 February 1998]. Retrieved from: Dialog Information Services, Palo Alto, CA, USA. Medline Accession no. 94155687, Dialog Accession No. 07736604.
Example 3:
JENSEN, B. P. 'Multilayer printed circuits: production and application II'. Electronik, June-July 1976, No. 6-7, pages 8, 10,12,14,16. (abstract) INSPEC [online]. London, U.K.: Institute of Electrical Engineers [retrieved on 1998-02-24]. Retrieved from: STN International, Columbus, Ohio, USA. Accession No. 76:956632.
Example 4:
JP 3002404 (TAMURA TORU) 1991-03-13 (abstract). [online] [retrieved on 1998-09-02]. Retrieved from: EPO PAJ Database.
Examples 5-11: Documents retrieved from the Internet
Example 5:
(Entire Work - Book or Report)
WALLACE, S., and BAGHERZADEH, N. Multiple Branch and Block Prediction. Third International Symposium on High-Performance Computer Architecture [online], February 1997 [retrieved on 1998-05-20]. Retrieved from the Internet:< URL: http://www.eng.uci.edu/comp.arch/papers-wallace/hpca3-block.ps>.
Example 6:
(Part of Work - chapter or equivalent designation)
National Research Council, Board on Agriculture, Committee on Animal Nutrition, Subcommittee on Beef Cattle Nutrition. Nutrient Requirements of Beef Cattle [online]. 7th revised edition. Washington, DC: National Academy Press, 1996 [retrieved on 1998-06-10]. Retrieved from the Internet:< URL: http://www2.nap.edu/htbin/docpage/title=Nutrient+Requirements+of+Beef+Cattle%3A+Seventh+Revised+Edtion%2C+1996&dload=0& path=/ext5/extra&name=054265%2Erdo&docid= 00805F50FE7b%3A840052612&colid=4%7C6%7C41&start=38> Chapter 3, page 24, table 3-1.
Example 7:
(Electronic Serial - articles or other contributions)
Ajtai. Generating Hard Instances of Lattice Problems. Electronic Colloquium on Computational Complexity, Report TR96-007 [online], [retrieved on 1996-01-30]. Retrieved from the Internet <URL: ftp://ftp.eccc.uni-trier.de/pub/eccc/reports/1996/TR96-007/index.html>
Example 8:
(Electronic bulletin boards, message systems, and discussion lists - Entire System)
BIOMET-L (A forum for the Bureau of Biometrics of New York) [online]. Albany (NY): Bureau of Biometrics, New York State Health Department, July, 1990 [retrieved 1998-02-24]. Retrieved from the Internet: <listserv@health.state.ny.us>, message: subscribe BIOMET-L your real name.
Example 9:
(Electronic bulletin boards, message systems, and discussion lists - Contributions)
PARKER, Elliott. 'Re: citing electronic journals'. In PACS-L (Public Access Computer Systems Forum) [online]. Houston (TX): University of Houston Libraries, November 24, 1989; 13:29:35 CST [retrieved on 1998-02-24]. Retrieved from the Internet: <URL:telnet://bruser@a.cni.org>.
Example 10:
(Electronic mail)
'Plumb design of a visual thesaurus'. The Scout Report [online]. 1998, vol. 5 no. 3 [retrieved on 1998-05-18]. Retrieved from Internet electronic mail: <listserv@cs.wisc.edu>, subscribe message: info scout-report. ISSN: 1092-3861\cf15.
Example 11:
Corebuilder 3500 Layer 3 High-function Switch. Datasheet [online]. 3Com Corporation, 1997 [retrieved on 1998-02-24]. Retrieved from the Internet: <URL: www.3com.com/products/dsheets/400347.html>.
(Product Manual/Catalogue or other information obtained from a Web-site)
Example 12:
HU D9900111 Industrial Design Application, (HADJDUTEJ TEJIPARI RT, DEBRECEN) 1999-09-28, [online], [retrieved on 1999-10-26] Retrieved from the Industrial Design Database of the Hungarian Patent Office using Internet <URL: http:/www.hpo.hu/English/db/indigo/>.
Examples 13 and 14: Documents retrieved from CD-ROM products
Examples 13 and 14:
JP 0800085 A (TORAY IND INC), (abstract), 1996-05-31. In: Patent Abstracts of Japan [CD-ROM].
Examples 14:
HAYASHIDA, O. et. al.: Specific molecular recognition by chiral cage-type cyclophanes having leucine, valine, and alanine residues. In: Tetrahedron 1955, Vol. 51 (31), p. 8423-36. In: CA on CD [CD-ROM]. Columbus, OH: CAS.\f5Abstract 124:9350.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|
|
Go to MPEP - Table of Contents
=online
business system 
=fees 
=forms
=help 
=laws/regulations 
=definition
(glossary)