"Safety starts days or weeks before the actual job. Think through the job and all the possible hazards that could emerge. Make a plan and a backup plan to deal with each hazard. Don't wait until you are in danger to realize you aren't prepared."

"Everywhere you go, observe where the exits are located -- at home, at work, on vacation, in a hotel and when you are shopping. Plus, periodically practice your escape plan."

"Safety takes a team effort just like football. If one member of the team is injured, everyone on the team is affected. Before doing a job, just like running a play, everyone should know their part and what their teammates will do. Communication maintains a team focus."

"Safety doesn't occur in a vacuum. No one knows the dangers associated with your work better than you do. If you team up with ES&H to write a job safety checklist that is simple and clear, you will reduce the risk of an accident."

"Working closely as a team is the only way to deal with the challenges and potential hazards of safely managing Fermilab's chemical and radioactive waste."

"To err is human, but high voltage does not forgive. Take a chance at a casino, not at the work place."

"I take a preemptive approach to safety by "thinking safety" 24/7, rather than 9 to 5. This forces me to analyze my daily tasks at home, at work or at play."

"We broke new ES&H ground in many areas on NuMI/MINOS. We had to work as a team, physicists and ES&H staff, to find creative, realistic solutions. It was a difficult but exhilarating experience."

"There's no higher priority than safety in a machine shop. I set out to change employees' mindset that 'accidents happen' and to convince them instead to buy into the goal of zero accidents."

"In the Receiving Department, safety is always the top priority. To reduce the amount of lifting and bending, a member of our team suggested using a conveyor system to lower the potential for injury."

"You can't simply aim to do something safely, or have a record that is better than last year. Our departmental safety record didn't improve until we, as a team, aimed for zero incidents and injuries in our daily activities."

"Safety is central to the planning of all the jobs we do, but the challenge was getting 'safety' from the planning stages..."

"Installing the magnets safely into the NuMI Pre-Target Tunnel was one of the highest priorities from the start of the project. Due to the limited space in the tunnel, we designed a system of custom-made carts and a winch..."

"When the safety and health climate at Fermilab changed in 1999, our group began looking at safety in a new light. Instead of looking outside our group for safety direction as in the past, we realized that we should be driving our safety program from within."

"Safety needs to be considered in all our activities. As Chairman of the Auditorium Committee I felt it was necessary to improve the conditions for Committee Members working on stage lights in the Auditorium."