Plasma Heating
In an operating fusion reactor, part of the energy generated will serve to maintain the plasma temperature as fresh deuterium and tritium are introduced. However, in the startup of a reactor, either initially or after a temporary shutdown, the plasma will have to be heated to 100 million degrees Celsius.
In current tokamak (and other) magnetic fusion experiments, insufficient fusion energy is produced to maintain the plasma temperature. Consequently, the devices operate in short pulses and the plasma must be heated afresh in every pulse. Ohmic Heating Since the plasma is an electrical conductor, it is possible to heat the plasma by passing a current through it; in fact, the current that generates the poloidal field also heats the plasma. This is called ohmic (or resistive) heating; it is the same kind of heating that occurs in an electric light bulb or in an electric heater.	Glowing Plasma inside the Tokamak Fusion Test Reactor
The heat generated depends on the resistance of the plasma and the current. But as the temperature of heated plasma rises, the resistance decreases and the ohmic heating becomes less effective. It appears that the maximum plasma temperature attainable by ohmic heating in a tokamak is 20-30 million degrees Celsius. To obtain still higher temperatures, additional heating methods must be used. Neutral-Beam Injection Neutral-beam injection involves the introduction of high-energy (neutral) atoms into the ohmically -- heated, magnetically -- confined plasma. The atoms are immediately ionized and are trapped by the magnetic field. The high-energy ions then transfer part of their energy to the plasma particles in repeated collisions, thus increasing the plasma temperature. Radio-frequency Heating In radio-frequency heating, high-frequency waves are generated by oscillators outside the torus. If the waves have a particular frequency (or wavelength), their energy can be transferred to the charged particles in the plasma, which in turn collide with other plasma particles, thus increasing the temperature of the bulk plasma.

PPPL is funded by the U.S. Department of Energy and managed by Princeton University.

About PPPL || How to Contact PPPL || News at PPPL || Fusion Basics Research Projects || Technology Transfer || Education Programs Publications || Meetings and Colloquia || PPPL Home Page

Updated: 12 November 1999 Send questions or comments to: Anthony R. DeMeo at ademeo@pppl.gov