|
||
![]() |
||
ITS Home | ||
![]() |
||
![]() |
NTIA Report TR-08-433bReduced Reference Video Calibration AlgorithmsNovember 2007Margaret H. Pinson, Stephen Wolf |
![]() |
![]() |
Abstract: This report describes four Reduced Reference (RR) video calibration algorithms of low computational complexity. RR methods are useful for performing end-to-end in-service video quality measurements since these methods utilize a low bandwidth network connection between the original (source) and processed (destination) ends. The first RR video calibration algorithm computes temporal registration of the processed video stream with respect to the original video stream (i.e., video delay estimation). The second algorithm jointly calculates spatial scaling and spatial shift. The third algorithm calculates luminance gain level offset of the processed video stream with respect to the original video stream. The fourth algorithm estimates the valid video region of the original or processed video stream (i.e., the portion of the video image that contains actual picture content). All the algorithms utilize only the luminance (Y) image plane of the video signal. |
Keywords: calibration; delay; gain; offset; spatial scaling; spatial shift; temporal shift; video |
Disclaimer: Certain commercial equipment, components, and software are identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses. |
To request a reprint of this report, contact: |
For technical information concerning this report, contact: |
![]() |
![]() |
ITS Home |