› Larger image In both images of this before-and-after sequence, a sample of Martian soil rests on a screen over the opening to one of the eight ovens of the Thermal and Evolved-Gas Analyzer instrument (TEGA) on NASA's Phoenix Mars Lander. Image credit: NASA/JPL-Caltech/University of Arizona/Max Planck Institute + Full image and caption
NASA's Phoenix Mars Lander Testing Sprinkle Technique June 09, 2008
TUCSON, Ariz. -- Engineers operating the Robotic Arm on NASA's Phoenix Mars Lander are testing a revised method for delivering soil samples to laboratory instruments on Phoenix's deck now that researchers appreciate how clumpy the soil is at the landing site.
"We're a little surprised at how much this material is clumping together when we dig into it," said Doug Ming a Phoenix science team member from NASA's Johnson Space Center, Houston.
The soil's physical properties are proving to be a challenge for getting a sample intended for one instrument to pass through a screen over a delivery opening. The instrument is the Thermal and Evolved-Gas Anaylzer, or TEGA, designed to bake and sniff samples to identify some key ingredients. The analyzer vibrated the screen for 20 minutes on Sunday but detected only a few particles getting through the screen, not enough to fill the tiny oven below.
"We are going to try vibrating it one more time, and if that doesn't work, it is likely we will use our new, revised delivery method on another thermal analyzer cell," said William Boynton of the University of Arizona, lead scientist for the instrument.
The arm delivered the first sample to TEGA on Friday by turning the scoop over to release its contents. The revised delivery method, which Phoenix is testing for the first time today, will hold the scoop at an angle above the delivery target and sprinkle out a small amount of the sample by vibrating the scoop. The vibration comes from running a motorized rasp on the bottom of the scoop.
Phoenix used the arm Sunday to collect a soil sample for the spacecraft's Optical Microscope. Today's plans include a practice of the sprinkle technique, using a small amount of soil from the sample collected Sunday. If that goes well, the Phoenix team assembled at the University of Arizona plans to sprinkle material from the same scoopful onto the microscope later this week.
The Phoenix mission is led by Peter Smith at the University of Arizona with project management at JPL and development partnership at Lockheed Martin, Denver. International contributions come from the Canadian Space Agency; the University of Neuchatel, Switzerland; the universities of Copenhagen and Aarhus, Denmark; Max Planck Institute, Germany; and the Finnish Meteorological Institute. For more about Phoenix, visit: http://www.nasa.gov/phoenix and
http://phoenix.lpl.arizona.edu.
Media contacts: Guy Webster 818-354-6278
Jet Propulsion Laboratory, Pasadena, Calif.
guy.webster@jpl.nasa.gov
Dwayne Brown 202-358-1726
NASA Headquarters, Washington
dwayne.c.brown@nasa.gov
Sara Hammond 520-626-1974
University of Arizona, Tucson
shammond@lpl.arizona.edu