NETWARS FREQUENTLY ASKED QUESTIONS
1. How do I import NETWARS models into OPNET Modeler? [Answer]
2. How do I configure Modeler to create and modify device models for NETWARS? [Answer]
3. How is link utilization calculated in the Capacity Planner? [Answer]
4. What is required for my custom device model to work with the Capacity Planner? [Answer]
5. What do I need to watch out for when accessing NETWARS process models within Modeler? [Answer]
6. My EPLARS/CINCGARS radios are not connected during Discrete Event Simulation. What can I do? [Answer]
7. Why does the version of OPNET Modeler and NETWARS have to be compatible releases (i.e. 5-1 and 11.0 or 4-2 and 10.5 or even 4-2 and 11.0. since you don't need Modeler to run NETWARS? [Answer]
8. NETWARS scans for terrain information during operations that don't have anything to do with terrain. Why? Is there a way to turn it off? [Answer]
9. How come I can not connect my two JTID radios? [Answer]
10. What routing algorithm does the Capacity Planner use? [Answer]
11. Some IERs in my network are failed. How do I go about finding the causes of failure? [Answer]
12. When I run a DES with multiple seed values, the results from the most recent run overwrites the one before. Is there a way I can collect the results from all simulation runs, so that I can compare them? [Answer]
13. What does the "Add" button in the Infrastructure Treeview do? [Answer]
14. If I modify a Template OPFAC, will the related OPFACs in my scenario change? [Answer]
15. Can I add new security classification levels? [Answer]
16. Why do I get this error when I run my discrete even simulation: "A packet is received from a port with no bentpipe configured."? [Answer]
17. What does "There was no path at the IP layer" mean in the CP web report? [Answer]
18. Traffic in my network varies over time. Is there a way I can capture the effects of changing traffic in a Capacity Planner evaluation? [Answer]
19. When computing Line of Sight, how do we compute the altitude for an OPFAC w.r.t. the terrain profile and antenna height? What value do we use for the antenna height? [Answer]
20. Does the Capacity Planner use Flow Analysis? [Answer]
21. Even though I specify multiple consumers for an IER, the traffic seems to be routed only to the first one? Isn't the traffic supposed to be identically routed to each of the consumers in the multiple consumer list? [Answer]
22. Can I run different dynamic protocols on my network? [Answer]
23. Will changing the value for the "IP Dynamic Routing Protocol" advanced attribute affect some or all the routers in my network? [Answer]
24. Can I run the tutorials without any licenses? [Answer]
25. Is there a way to get an itemized list of devices in my scenario? [Answer]
26. When I export the scenario contents to HTML or generate a briefing, the OPFACs and organizations are on top of each other. Is there a way to overcome this? [Answer]
27. I have relationships defined across my network, making the workspace very cluttered and hard to view. How can I clean up the view so that it only displays the infrastructures I am interested in? [Answer]
28. I can see my infrastructures (ie. relationships, links, etc.. in the Define Infrastructure Treeview dialog box, but I can't see them on the workspace. [Answer]
29. Why am I not able to select the left treeview in the Define Infrastructure dialog box? [Answer]
30. How is grade of service calculated? [Answer]
31. I see some of the IERs reported as Undelivered. Where did they go? [Answer]
32. What are Undelivered IERs? How are they calculated? [Answer]
33. I have large data IERs (greater than 20 Mb. and none of the IERs go through? Why? [Answer]
34. All my data IERs are failed or reported as being Undelivered. What could be the reason? [Answer]
35. Is there any online help on the flags that can be set for the op_runsim executable? [Answer]
36. I want to see the routing tables generated during the simulation. How can I do that? [Answer]